توصیه های من برای خرید ابزار

Magnetic lift

Industrial magnets, or industrial magnets, are giant magnets that can move heavy metal parts such as beams, molds, parts, and so on. They are heavy, in other words, these magnets lift several times their own weight. In this article, you will get complete information about these magnets.

Magnets are among the lifting devices that have a very long life. These magnets are able to carry metal parts by creating a magnetic field. On these magnets, a lever is installed, by which the magnetic field. It is disconnected or connected and the lifting operation is performed and after finishing the work, the magnetic field disappears by releasing the switch again and the body is released.

abzarbrand

Technical specifications of magnetic lift

Because industrial magnets are used to carry loads from the ground, they usually have to be supplied with a high reliability. Long life and performance without power loss during working time are the features of magnets. To prevent an accident, the magnets have a mechanical lock on their lever that prevents the lever from shifting suddenly and causing an accident.

One of the unique features of industrial magnets is the ability to lift moving objects. Unlike overhead cranes, where the chain hook must be connected to the load at one point, the lifting operation takes place as the magnet approaches the load at each point. Industrial magnets are produced from 100 kg to 3 tons.

Samsung 1 ton magnetic lift magnet has a width of 176 mm, a length of 258 mm and a height of 176 mm.

This magnetic lift has a lifting capacity of 1000 kg on a 25 mm steel sheet and has a tensile strength of 1000 kg on a cylindrical device.

This type of magnetic lift never weakens and provides durable performance and you can use it safely and permanently.

Some applications of sheet metal industrial magnets

Our sheet magnet digikala is commonly used in factories, wharves, transportation or engineering workshops and warehouses.

These magnetic lifters are used to move steel plates, blocks or cylinders safely.

Industrial magnet load carrying capacity

Industrial magnets are produced and marketed for use in industry with different capacities. The capacity of the magnet is determined by the manufacturer, but the maximum capacity of the magnet also depends on the metal to be lifted by the magnet, no matter how smooth the metal surface is. The thicker it is, the higher the magnet capacity, and on the other hand, if the metal is curved, the magnet capacity decreases.

For example, if the magnetic capacity is 1 ton but the metal has a curvature, the magnet capacity can be reduced to 0.5 ton depending on the degree of curvature.

Three important factors affecting the capacity of magnetic lifters:

Nominal capacity of industrial magnets

Shape and amount of flat and flat metal

Thickness of metal

How magnetic lifters work

After placing the Meg lift on the piece, pull the lever to the on position so that the slippery bar is behind the pin and locks. This position is called magnet.

After moving, pull the lever down slightly and press the button on the lever to release the slippery bar from behind the pin. This is called DE_magnet or off mode.

Pay attention to these points;

_Mag lift should be placed on the flat part of the device. Make sure that the small pieces do not stick under the Mag lift.

The lift must be located on the center of mass of the device.

_To find the exact location of the center of the crime can be obtained by moving the location of the lift Meg several times.

_After placing the handle in the on position, make sure that the sliding bar is properly locked behind the pin.

Advantages and disadvantages of using industrial magnets

The most important advantage of the industrial magnet is the ability to lift moving objects, so it is much easier to connect to the object than the crane and requires less time,

It is also an advantage to carry objects weighing several tons to several times the weight of the device itself, but these magnets are only able to carry metal objects that are attracted by magnetic force and can not carry other objects, which is one of their disadvantages. it counts.

Price of industrial sheet magnet

The magnets available in the Iranian market are mostly made in China and the price varies depending on the power and capacity of the magnet. In general, they are more affordable than electric cranes and are more expensive than hand-held cranes. Dear customers, you can get these magnets with the best price and quality from the brand.